Check out the new E-Flite ElectroStreak - a sleek prop-driven RC aircraft that can reach speeds of up to 209km/h on a 4S LiPo! This fantastic model is inspired by the Great Planes ElectroStreak, which was first published as scratch-build plans in the 1980's.
Incredible Power
The E-Flite ElectroStreak features a super high-performance brushless setup consisting of an Avian 45A Lite ESC and an Avian 1000kv-3542 brushless outrunner motor. Being 3S and 4S compatible, you can slowly build up to maximum speed. If you pair this motor and ESC combo with a 3S 1800-2200mAh LiPo battery, you can reach speeds of up to 160km/h. Plug in a 4S 1800-2200mAh LiPo battery and you'll be hitting speeds of up to 209km/h - that is even faster than the E-Flite Viper 70mm EDF! Pick a battery size between lower 1800mAh and higher 2200mAh capacities for either more speed or more flight time.
Up-To-Date Technology
Receive the best of the best! This remote control plane is equipped with modern Spektrum technology designed to make setup as easy as possible. The Spektrum AR631+ Receiver installed in the Bind N Fly version contains a Smart Transmitter Model File that automatically imports the model onto your NX or IX series transmitter during the binding sequence.
Additionally, the Avian 45A Lite ESC installed is capable of sending real-time power-related telemetry to your transmitter as you fly.
View your battery voltage, the motor's RPM, current, and more. This feature works with Spektrum Smart Batteries and also non-Smart batteries when using compatible receivers (such as the installed AR631+) and a Spektrum AirWare-equipped transmitter.
SAFE Technology bank-angle limits and gyro stabilisation is also available with the installed receiver to make the model even easier to fly.
Durable Construction
The ElectroStreak 1.1m is constructed of composite-reinforced EPO, which is a lightweight but stiff and super durable material. Four 13g Spektrum Metal-Geared Digital Servos are installed in the model for precise control and reliability at high speeds.
Super Easy Assembly
No glue is required to assemble this RC plane. All you need is a Philips Screwdriver - install three screws: one for the tail, two for the wing, and you are ready to go! You'll have the model fully assembled before your battery finishes charging. This RC plane will fit in the back of most vehicles fully assembled, but if you need to remove the wing for transportation or storage it is quick and easy.
Pilot Skill Level
This electric RC plane requires a pilot with some experience to be flown successfully. Due to its flying characteristics, it is recommended that pilots can successfully fly the E-flite T-28 Trojan 1.1m, Sportix 1.1m, Conscendo Evolution 1.5m, 64mm EDF Jet or similar before attempting to fly the E-Flite ElectroStreak 1.1m.
Overall, the E-Flite ElectroStreak 1.1m is a fantastic affordable high-speed RC glider for pilots with experience flying similar models. It features fully up-to-date tech and construction, making it super easy to set up, super durable, and a whole lot of fun.