Virtual RC Racing is the ultimate R/C racing simulator and on-line R/C racing community. This product is the most realistic r/c surface simulator available in the market.

TrakPower 4800 Saddle

TrakPower 4800 Saddle Overview

• Ultra high performance 10th scale hard-cased saddle LiPo saddle pack system.
• 100% factory matched cells for IR, Capacity and Voltage
• Meets and exceeds ROAR Sanctioning requirements.
• TrakPower exclusive embedded gold terminals.
• Wide area ultrasonic tab-welding.
• 3.63mOhm x2 typical at the terminals!
• Terminals mate with Sermos, Corally, or standard 4mm Gold-Bullet connectors.
• Supplied with link cable allowing packs to be connected in series on either side of the chassis.
• Simple connection with V-Balance hardware and chargers.
• 100+ race-worthy cycles with very simple maintenance
• Massive run-times, on-track and off-road, 48% higher energy density than equivalent capacity NiMH
• Maintains 7.4V+ flat-line under typical racing loads, for consistent power and precise control.
• No memory-effect, can be part-charged at the track as required without need for deep discharge cycling.
• 2C fast charging (with V-Balance recommended)
• 100+ race-worthy cycles, 200+ for practice.
• Extremely slow self-discharge, can be charged days or weeks ahead of use.
• Easy to charge and maintain in peak condition with a simple LiPo charger/balancer combination
• Eliminates complex charging routines.
• TrakPower comes from the same stable as FlightPower, technical and market leaders in LiPo for RC Flight market.
• Drop-in packs for chassis designed for Sub-C saddle packs.
• TrakPower V-Balance system available for plug and play maintenance, performance-optimization and charge-safety.
• TrakPower Pit Pro 550 Li charger, fully compliant low-cost high quality 5Amp charger available for a painless transition to the new power-source for RC Motorsport.

TrakPower 4800 Saddle Specifications

The TrakPower 4800 is compatible with RC vehicles that use 6 cell saddle NiMH or NiCad packs.

Like all LiPo packs, the TrakPower 4800 Saddle packs require the use of LiPo compatible chargers.

Like all TrakPower LiPo packs in the range the TrakPower 4800 saddle packs features the easy use of 4mm gold sockets from the output and a 2mm socket on it series link lead for connection to a TrakPower V-Balancer.

			[FPTP48002SSP] TrakPower 4800 1+1s - Off road buggies get a slimmer taste of the LiPo revolution with the ultra-durable splash-proof saddle pack system.