 TrakPower 2s LiPo Overview- Ultra high performance 10th scale hard-case LiPo battery.
- Cells 100% factory matched for IR, Capacity and Voltage
- Meets and exceeds ROAR Sanctioning requirements.
- TrakPower exclusive embedded gold terminals.
- Wide area ultrasonic tab-welding
- 8.35mOhm typical at the terminals
- Terminals mate with Sermos, Corally, or standard 4mm Gold-Bullet connectors.
- 100+ race-worthy cycles with very simple maintenance
- Massive run-times, 15 minutes achievable from one charge.
- No memory-effect, can be part-charged at the track as required without need for deep discharge cycling.
- 2C fast charging (with V-Balance recommended)
- 100+ race-worthy cycles, 200+ for practice.
- Extremely slow self-discharge, can be charged days or weeks ahead of use.
- Easy to charge and maintain in peak condition with a simple LiPo charger/balancer combination
- Eliminates complex charging routines.
- TrakPower comes from the same stable as FlightPower, technical and market leaders in LiPo for RC Flight market.
- Slot-in replacement chassis designed for 6-cell Sub-C NiCd / NiMH
- TrakPower V-Balance system available for plug and play maintenance, performance-optimization and charge-safety.
- TrakPower Pit Pro 550 Li charger, fully compliant low-cost high quality 5Amp charger available for a painless transition to the new power-source for RC Motorsport.
TrakPower 2s LiPo Specifications| Nominal Voltage | 2 Cell 7.4V | | Capacity | 3200 / 3600 mAh | | Cont Discharge | 20C 64/70Amp | | Peak Discharge | 30C 96/108Amp | | Max Burst Discharge | 40C 128/144Amp | | Dimensions | 137x47x20.8 | | Weight | 193g |
TrakPower 2s LiPo CompatibilityThe TrakPower 2S is compatible with practically any RC vehicle that uses a standard 6 cell NiMH or NiCad. Like all LiPo packs, the TrakPower 2S packs require the use of LiPo compatible chargers. Like all TrakPower LiPo packs in the range, the TrakPower 2S packs features the easy use of 4mm smart terminal system that makes connection to speed controllers and chargers simple. There is also a 2mm socket for connection to a TrakPower V-Balancer.
|