E-Flite Diamante 25e ARF

E-Flite Diamante 25e Overview

The E-flite® Diamante 25e ARF was designed by champion pilot Peter Goldsmith to provide intermediate to experienced pilots a precision aerobatics platform with excellent stability and benign stall characteristics. At the heart of this design is the SD8020 airfoil that provides excellent tracking and crisp response in any axis. It is also extremely resistant to accelerated stalls so you’ll feel like you’re on rails in any attitude. Machined aluminum control horns let you use high-torque mini servos and fly aggressive aerobatics with confidence.

As always, E-flite has gone the extra mile to make your flight experience as convenient as possible with this highly prefabricated ARF design. Getting to the battery and electronics is a breeze with the easy-access magnetic hatch. And the large battery compartment can accommodate a wide range of Li-Po packs. The balsa and light ply construction is complemented nicely by the custom Peter Goldsmith Ultracote® trim scheme. The fiberglass cowl and wheel pants even come painted from the factory. The bolt-on spinner is also colored to match the cowl. All you have left to do is a few hours of assembly and you’re flying.

E-Flite Diamante 25e Key Features

• Highly prefabricated ARF Design
• Great for intermediate pilots new to precision aerobatics
• Excellent stability in all axes—goes where you point it
• SD8020 airfoil provides crisp response and excellent stall characteristics
• Lightweight balsa/light ply construction
• Factory-painted fiberglass cowl and wheel pants
• Easy-access magnetic battery hatch
• Designed for use with E-flite Power 25 or Power 32 brushless motors
• Custom Peter Goldsmith trim scheme
• Designed by Peter Goldsmith

E-Flite Diamante 25e Specs

•  Wing Span:48 in (1200mm)
• Overall Length:50 in (1250mm)
• Wing Area:485 sq in (31.3 sq dm)
• Flying Weight:3.6-4.2 lb (1.6-1.9 kg)
• Motor Size:E-flite Power 25 BL Outrunner Motor,870Kv (EFLM4025A) or E-flite Power 32 BL Outrunner Motor, 770Kv (EFLM4032A) Required
• Radio:Spektrum DX6i

Required

• Servos:JR E381Mini Servo (JPS381) (4 Required)
• Prop Size:APC 12 x 8E prop (APC12080E) with Lightweight Setup or APC 13 x 6.5E prop (APC13065E) for High Power Precision Setup (Required)
• Speed Control :60A Brushless ESC (EFLA1060) Required
• Recommended Battery: FlightPower 3S 4250mAh Li-Po pack (FPEVOLITE-42503S) for Lightweight Setup or FlightPower 4S 4250mAh Li-Po pack (FPEVO30-45003S) for High Power Percision Aerobatic Setup (Required)

Needed to Complete

You will need to use your own motor, ESC, radio, receiver, servos, prop, battery and charger in order to fly the Diamante 25e ARF. Please review the list of items for the recommended "Precision 3D Setup" and the "Lightweight Outrunner Setup" for the option that best fits your experience level and flying preferences.

	[EFL4050] Diamante 25e ARF - A perfectly balanced precision aerobatic performer with gentle stall characteristics, from the drawing board of Peter Goldsmith. Download Diamante 25e Manual

	Compatible 2.4GHz Receivers   [SPM66001E] Spektrum DX6i - Full range DSM2 transmitter with airplane and helicopter functionality. The DX6i comes with 10 model memory and a large LCD for easy programming. Note that this system is ideal for upgrading your 36MHz system and comes with the DX6i Tx and the AR6200 DSM2 Rx only - NO SERVOS. Download Spektrum DX6i Manual Mode 1 Mode 2

	[JRPS381] JR E 381 mini servo, 22g, single ballrace, 4.2 kg.cm < JR Servo Comparison Chart >     Size mm: 26x15x33 Weight: 22g Torque: 4.2 kg.cm torque Speed 0.23 Gears Plastic Ballrace 1 Each 2 Units

	[ Replacement Shaft]     EFLM4025A - The E-Flite Power 25 brushless outrunner motor is ideal for 25-size sport and scale airplanes weighing 3- to 5.5-pound (1.4- to 2.5-kilograms) 15-size 3D airplanes up to 3.5 pounds (1.6 kilograms), or models requiring up to 550 watts of power.

	[ Replacement Shaft]     EFLM4032A - The E-Flite Power 32 brushless outrunner motor is Ideal for 30- to 36-size sport and scale airplanes weighing 3.5- to 6-pounds (1.6- to 2.7-kilograms) 25- to 36-size 3D airplanes up to 4.5 pounds (2-kilograms), or models requiring up to 700 watts of power.

FPEVOLITE-42503S	4250	11.1V
FPEVO30-45003S	4500	14.8V

	[APCLP11085E] APC 11 x 8.5 Electric prop [APCLP12080E] APC 12 x 8 Electric prop [APCLP12100E] APC 12 x 10 Electric prop [APCLP13100E] APC 13 x 10 Electric prop

	Outdoor Aerobatic		Ducted Fan
	Larger Electrics		Electric Hotliners
	Phoenix Report		Flying Wings
	For the Kids		Pylon Racers
	Slow Flyers		Scale
	Park Flyers		Scale Ducted Fan
	3D Park Flyers		Scale WW1
	Outdoor		Scale WW2
	Electric Sailplanes		HobbyZone