 Flying 3D is the possibly the most fun thing to do with model aeroplanes. Have fun teaching yourself new tricks like rolling circles, hovering and the Harrier. It's all possible and more with the Joker.
There are lots of indoor 3D models around, but not many of them are made from EPP - most are made from foam or depron which is a lot easier to damage. So building and learning to fly 3D with a model made from EPP makes a lot of sense!
The Joker features 'plank' construction, with a unique carbon spar, making it easy to build and fly in a few hours. The parts key & glue together, add a cheap GWS 350C motor and gearbox, three lightweight servos, receiver and ESC, a Lithium Polymer Battery and you'll soon be ready to fly. For even hotter performance choose a brushless motor - personally I don't think you need a 'hot' motor, the Joker will hover at 50% throttle with the GWS motor
All the EPP components included in the kit are produced with a computer controlled dual axis cutting machine and finished by hand to ensure the quality of each part is correct and ready to assemble. Joker Specifications- Wingspan 0.9M/35.4"
- Length 0.77M/30.3"
- Weight 290gms/10.2oz
- Throt/Aile/Rudd/Elev
- Beginner to Expert
In the Box- EPP Fuselage 3pcs
- EPP Wings + Ailerons
- EPP Rudder + Elevators
- Carbon fibre ribbon spar
- Hardware
- Glue
- Instructions + plan
Basic Items Required to complete the Joker- 4 Channel Radio Control set
- 3 x Micro servos
- Light weight Rx
- GWS 350C Geared motor + 10 x 5 Propellor
- 20amp Electronic Speed Controller
- 3 cell 750 - 1250mah Lipo battery + Charger
- A few hand tools
- Cynoacrylate glue
|
I
want a quote on how much freight it will cost to send items to me.
CS Joker Instructions
